Extremely High Power Density. Easy Processing. New Possibilities.
THEVA Pro-Line is our high temperature superconductor (HTS) wire. It is characterized by extremely high current carrying capability offering unsurpassed current and power densities for various applications. It is produced in our industrial production line in Germany under highest quality standards.
With our innovative strength, we are perpetually developing our HTS wire. This year, we achieved an increase of 70 % for the current carrying capacity and could extend our production lengths even further. This makes THEVA Pro-Line world leader.
Many of our different product types are available on short notice, ask for our stock list!
Properties of our HTS wire
The sophisticated design of THEVA Pro-Line HTS wire results in good mechanical and magnetic properties. Small bending radii, high tensile strength as well as an extraordinary performance in magnetic fields characterize the wire. You may find details in the linked product overview on the right-hand side of this page and our general properties brochure.
Structure of THEVA Pro-Line HTS wire
Our THEVA Pro-Line HTS wire is designed for best performance in different applications. Therefore, we use sophisticated production technology to produce our wire layer-wise on a non-magnetic steel substrate. Further details about our tape structure can be seen in the following videos.
Theva experts gladly assist you in your superconductor project
With increasing popularity of superconducting materials in different applications, we built up a profound knowledge base for the use of our HTS wire. If required, we will gladly offer our competent support in your superconductor project and help you find the right partner for the production of your components. Get in touch with us!
Applications for THEVA Pro-Line HTS wire
There are many possible applications for HTS wire. Especially energy and grid topics offer many new topics and utilization areas for superconductivity.
On our page applications, you may find several examples for the application of THEVA Pro-Line. You have further ideas or even a project, where you consider using HTS wire? Contact us and we’ll discuss your possibilities!
Our sales team is happy to support and advise you.
Ask for our stock list, too!
High temperature superconductors 3/2022
Handling HTS tapes:
THEVA Handling Info
Overview THEVA Pro-Line
THEVA cooperates with the Israeli company Quantum Experience Ltd., who manufactures and sells superconductor experiment kits and show kitchen sets under the brand name of “Quantum Levitation”. The experiments show the unique physical properties of magnetic levitation of superconducting materials. THEVA Pro-Line HTS wire is used to manufacture the levitators. The sets have been specially developed for use in schools, universities and other educational institutions.
THEVA is not only HTS wire manufacturer but cooperates with competent partners to produce high performance coils from the THEVA Pro-Line wire.
With this knowhow, we can develop and produce coils of different sizes and performances. The maximum size for coils is currently 1.4 m (4‘7“). Depending on the application, different potting compounds can be used to stabilize the windings and enable efficient cooling.
One example for the application of superconducting coils from THEVA is the EU project EcoSwing, where a 3.6 MW wind turbine generator was developed and built. The use of THEVA coils resulted in a lower size and weight of the generator.
TAPESTAR-Family: Quality Management for Coated Conductors.
The TAPESTAR™ enables rapid, high-resolution quality inspection for superconducting tape. By means of a non-contact measurement method, the device produces continuous scans of the critical current along the tape with millimeter resolution, also enabling reliable detection of local faults and non-uniformities in the superconducting coating.
The measurement method can be used for all types of HTS superconducting tape (1G or 2G) and works independently of their magnetic properties – also for thick laminated or insulated tapes where electrical contact is unavailable.
Many laboratories and all well-known tape producers rely on this method.
The TAPESTAR™ XL is suitable for quality control in a production environment or incoming inspection of goods. It can be customized for various different tape widths.
NEW Features for our Tapestar XL™ series:
- Tapestar ™ XL-HF for measurements up to 1 T @ 77 K
- Tapestar ™ XL-W for tapes with widths up to 40 mm
- Optional for all systems: Inkjet printing for comfortable marking, enabling exact correlation of Tapestar data and real tape positions
These features might be available as a retrofit solution for your existing Tapestar ™ XL or can be purchased with a new Tapestar ™ XL device.
The following note is intended to serve as notice under the virtual patent marking provisions of various jurisdictions, including, but not limited to, the America Invents Acts, and as notice under 35 USC § 287(a).
Products of the THEVA ProLine HTS wire series are protected under US patents US 7727335, US 8983563 and US 7056866 and US 8060169. For the latter THEVA holds licenses of the patent owners.
This list may not be complete and the ProLine products may be covered by additional patents in the United States and other countries. Other patents relating to these products may be pending in the United States and/or foreign jurisdictions.